Boasting a powerful 533MHz CPU and 128MB of nonvolatile flash memory, this processor packs a big punch at a moderate price. With a built-in ZigBee® transceiver
and support for wireless bi-directional communications, the XP-3 can provide the user with rock-solid control and feedback from devices such as music servers, lighting, security, and much more. The XP-3 can also be configured to support one-way control via non-Ethernet enabled RTI in-wall products (Ex. RK1/RKM-1/RK2) and 433MHz remote controls.* For complete control in any room, the XP-3 even allows powerful two-way control with Ethernet enabled RTI in-wall controllers, and full support for the RTiPanel and Virtual Panel Apps.

The XP-3 control processor's power really becomes evident when you see the list of features normally reserved for higher-priced processors, such as a built-in astronomical clock, Ethernet, and relay control and sensing. There are also two IR output ports with routing capability and a multi-purpose I/O port will accept an IR emitter or RTI accessory devices for voltage sensing or one-way RS-232.


Supports Virtual Panel and RTiPanel Apps.

Supports same two-way drivers used by XP6/XP8.

Powerful 32bit, 533MHz CPU.

128Mb of non-volatile Flash memory stores your system configuration
even when power is not present.

One multi-purpose I/O port supports optional RTI power sensing and
communications modules.

Two IR output ports with variable output.

Two assignable voltage sense inputs.

Two programmable relay outputs.

One two-way RS-232 port for bi-directional communication with
supported devices.

Integrated 10/100Base-T Ethernet port for programming, control and
two-way communication with compatible devices.

Integrated 10/100Base-T Ethernet port supports Power-over-Ethernet
(POE) Class 3.

Built-in astronomical clock for time-based events and sleep timers.

Built-in 2.4GHz ZigBee® RF transceiver module and removable
antenna.

Compatible with industry standard IR emitters and blasters.

Configurable for communication with RTI in-wall products and
433MHz wireless controllers.*

Programmed using the RTI Integration Designer Software.

USB 2.0 and Ethernet programming.

Field upgradable firmware.


*NOTE: Using a 433MHz RTI remote control requires a separate RM-433
Antenna. Also, while this configuration is possible, it’s use should be
limited to secondary zones that aren’t heavily used (guest rooms, outdoor
areas etc). Installations requiring primary control via both Zigbee and
433MHz controllers should use an XP-6 or XP-8 control processor.

 

RTI XP8-S Control Processor

RTI XP-3 Control Processor